Following a review of a risk assessment an employer was concerned about the risk of falls from openings along the edge of a mezzanine floor when pallets were being placed and retrieved using a fork lift-truck. Removable metal bars and chains were placed across the openings when they were not in use. This relied on the operators remembering to put the bars and chains back after use. The employer was also concerned that the chains would give inadequate protection if someone fell against them.
The employer considered the use of a harness system which, when worn, would prevent the operator from getting to an unguarded edge during loading. However, if a second person approached, they would have nothing to stop them falling from the open edge. In addition,there were time consuming issues and costs relating to training the user and inspecting the equipment. There would also have been a danger that the trailing line used with the harness system would constitute a tripping hazard for other workers.
The employer decided to install special pivoting safety barriers which would provide continuous edge protection for all employees and not just the person engaged in loading. When a
pallet is being landed from below, the barrier is arranged so that it provides a pallet sized opening at the mezzanine edge with the internal edges guarded. Once the pallet is landed, the
barrier is pivoted forward so that the mezzanine edge is now guarded and the pallet can be accessed from the mezzanine platform without the risk of a fall.
The safety barrier provided collective protection for all employees and was therefore a better alternative to providing a harness which would only protect the wearer. Employees also no longer had to remember to put the bars back in place and the unsatisfactory system of using chains was removed.
1. The review of the risk assessment showed that people working on the mezzanine floor were in danger of falling from height. The bars and chains previously used were not sufficient to protect workers from these dangers.
2. The use of harnesses was discounted due to the inherent risks to anyone not wearing the equipment and the additional costs.
3. The employer decided that the best way to counteract the risk was to install a new system of pivoting safety barriers. This ensured that edges were guarded at all times. They also ensured that all employees, rather than just individuals who would have benefited from the use of harness systems, were given protection.
The pallet gate design and manufacturing services (To ISO 9001) provided by our in-house mezzanine barrier division meet the recommendations of the Health and Safety Executive
Do you need help in providing a suitable HSE recommended double barrier system for you loading operation? - We here to help!
You can select from six different models in the Safety Pallet Gates section of this website. You will also find a helpful Selecting Your Pallet Gate guide page. Or on each of the model pages, there is detailed information on what the model does and the full dimensions etc. Plus there is a specific enquiry form for each model for you to use.
You can use our easy-to-use online Enquiry Forms- Just select the one which covers your particular application to tell us what your exact requirements are and we will provide a no-obligation, competitive quotation for the right type of safety gate to meet your safety requirements. Alternatively, you can call our sales team to discuss your problem in more detail . For UK calls 0161 223 1990 or International calls to +44 161 223 1990 or by email to firstname.lastname@example.org
If you have any questions or wish to
discuss your application, please
contact our sales team:
UK Calls: 0161 223 1990
International calls to:
+44 161 223 1990 or by email:
Or use our contact forms
Pallet Gates and Safety Barriers
Div. of DALE Lifting and Handling Specialists
2 Kelbrook Road
you may wish to read our policy before continuing.