Enquiry Form for Hoist or Crane Loading Pallet / Load Safety Gate for Opening in Mezzanine or Platform


Please read these notes carefully and try to assist us by answering all of the questions you can on the form below. But, please don't worry if you are unsure of what is required. We will study your answers and contact you to clarify details needed before providing our solution with a cost effective quotation.  Alternatively,  you can call our sales team to discuss your requirements.


If you have a particular model or models that you prefer,  please specify in Preferred model(s) required.  However, if we note that a particular model is not really suitable for your dimensions, we will quote for a more suitable alternative.


Special features for gates which can  be used for overhead loading applications are:


  •  The Hi-Gate is the ideal model for overhead loading operations as it has pivoting gates each end which allow a suspended load to pass through the safety enclosure without the need to land the load within the safety area.  
    There are three models: The Hi-Gate Standard is a twin bar gate. The Hi-Gate Plus is a three bar gate and the Hi-Gate Low Pivot model has three bars and reduced headroom.
  • The Sigma model is particular useful for applications with very low headroom as the edge gate has twin pivoting gates which pivot up either side of the opening and are much lower than the Hi-gate models. The inner gate is a fold up gate which needs to be closed to access the load.  The load has to be landed and disconnected from the hoist within the safety area. To move a non-wheeled load it will require landing onto a suitable trolley or pallet truck.

Special note: If headroom is very tight you may need to alter the hoist feed system as the gates could foul the hanging cables . 


Please specify any of your particular needs in special requirements


Standard finish is Galvanised.  Powder coating to tube is available at extra cost, please specify in special requirements

Palle/Load Dimensions
Loading Area Dimensions

Click on images for larger view

Note: Dimension D is not relevant for this application.

Please specify measurement units you are using on the form e.g mm, cm, inches

If you require more than one gate with differing dimensions or requirements, it may be easier to complete and submit a form for each one separately.


Your form message has been successfully sent.

You have entered the following data:

Enquiry form for hoist loading safety gate for mezzanine or platfom

Please correct your input in the following fields:
Error while sending the form. Please try again later.

Note: Fields marked with * are required

Call today on 0161 223 1990

If you have any questions or wish to

discuss your application, please

contact our sales team:


UK Calls: 0161 223 1990

International calls to:
+44 161 223 1990 or by email:


Or use our contact forms


Pallet Gates and Safety Barriers

Div. of DALE Lifting and Handling Specialists

2 Kelbrook Road


M11 2QA

United Kingdom


New EU legislation requires us to inform you that we use cookies.Our use of cookies is limited, but
you may wish to read our policy before continuing. 

Get social with us.

Print Print | Sitemap Recommend this page Recommend this page
© Mezzbarriers.co.uk 2016