Make your installation even easier! - You can order your handrails in ready-made kits here.
Just complete the quotation request form (Bottom of this page). To recieve your no-obligation and competitve quotation for your ready-made posts and cut tube rails.
On-site assembly couldn't be easier!- NO CUTTING OR WELDING - Just slot the horizontal rails into the post fittings and tighten with an allen key before bolting down.
Three handrail standard tube sizes available - Posts and rails can be ordered in 3 sizes - B34 (33.7 mm OD), C42 (42.4 mm OD and D48 (48.4 mm OD) with standard length rails cut for 1.0,1.5 and 2.0 metre post centres or cut to order- SEE BELOW
In addition, you can order a ready-made safety gate and Hi-Vis easy-ft PVC hazard warning striped tube sleeving for additional safety.
To find out more about the components used in these ready-made posts etc. shown below, the part numbers illustrated can be found in our online Tube Clamps Catalogue
For customising to specific end-user requirements, powder coating may be applied over the galvanising of the tubes in a wide spectrum of RAL or BS colours on request. Where necessary, PVC or powder coating may also be applied to the Interclamp fittings as well. Please contact us with your requirements, so that we can discuss the options available to meet the needs of your exact specification.
1100 mm high with top corner elbow, mid rail 3 way elbow and flanged base.
1100 mm high with 300 mm overhang with top long tee, mid rail two socket cross, and flanged base. Two elbows terminate the extension overehang. All galvanised.
Twin tube rails for the top raila and knee rail are available for post centres 1000 mm, 1500 mm and 200o mm. All galvanised.
Alternatively, we can cut special lengths to your specific requirements on request.
Powder coated tube available to order.
Tell us the RAL colour you need in special requirements.
Just complete the online quotation request form below now to receive your No-obligation and competitive written quotation.
1100 mm high with top post cap, top twin swivel short tees, mid rail twin swivel short tees and flanged base.
Twin wall flanges with fixings (Not supplied) can be used to terminate the handrail at an end wall. All galvanised.
Fully-Assembled with stainless steel cpring-closure. Made to suit your gap, up to 1200 mm between posts.
See our Personnel Safety Gates page for more options.
Gate complete with 1100 mm post with top elbow, mid rail short tee and flanged base. All galvanised.
Improve the visibility of your handrails and safety zones. Easy-fit PVC tubular sleeving - Just springs over tube and grips. Durable and wipe clean finish. (Used by scaffold companies). Sold in one metre lengths and can be butted together for longer lengths and is easily cut to fit.
No Problem! - We can also supply handrails for mezzanines, platforms, staircases and Disability Discrimination Act (DDA) and the Building Regulations Part M:2004 compliant systems too!
Please don't hesitate to call our sales team for advice and prices on 0161 223 1990 or international +44 161 223 1990 - by email on email@example.com. to tell us about your application and we will provide a no-obligation competitive quotation tailored to your requirements. A simple sketch is usually very helpful.