Hi-Gate Universal Safety Loading Gate System                       Unlimited Load Height


Innovative design. Use anywhere, totally adaptable to any location.  Uses standard components, flat-packed for transport, but easy to assemble and install. 


The Hi-Gate design has proven the ideal answer to numerous safety issues, which other gates do not address. Can be used with forklifts, overhead cranes or hoists. 


The innovative 'Hi-Gate' range of safety gates have been specifically developed to provide fool-proof safety for personnel working a height.


The design is ideal for many loading applications on mezzanine floors, hoist openings, scaffold platforms, teagle openings or hoist doorways.


The Hi-Gate model is offered to bespoke requirementts. See detals below


Request a Hi-Gate Universal Safety Gate quotation at the bottom of this page


How It Works

The gates pivot up and down at either end of the load allowing unlimited load height, cleverly hinged to automatically close the edge gate when personnel need to enter the enclosed loading area. An anti-slam damper is included for operator safety.


Hi-Gate Universal Safety Gate System - Standard model or special versions for specific applications are possible. 


  • Galvanised Tubular steel construction
  • Supplied complete for simple installation (Partially dismantled for shipment)
  • No limit to load height
  • Balanced action provides easy opening
  • Anti-slam damper for operator safety
  • All parts are replaceable
  • Allows clear view of operation
  • Reinforces sense of security
  • Failsafe operation
Hi-Gate Custom-Built Universal Unlimited Load Height Safety Gate
Features and benefits and full dimensions
Adobe Acrobat document [735.9 KB]
Hi-Gate Dimensions (mm)










open end





2 bars

Up to


Up to


Inside width

+ 1250


Bespoke width

Overall width including mechanism - e.g. inside width 1500mm overall width 2197mm



Optional Features: 

  • Extra wide opening (Up to 2500 mm).
  • Extra deep (up to 4500mm
  • Special doorway teage/runway hoist application model (See case study)
  • Powdercoated tube finish.
  • Lower pivot height for reduced headroom 
  • Toe rail and or kick plate for additional safety

Optional Extras

  • Additional handrailing to complete barrier infill or extend around platform as required
  • Floor plate in aluminium chequer plate 1250 mm wide x 1150 mm deep with 100mm fold to protect edge (Recommended for wood floors).
  • Easy fit PVC hazard warning tube sleeves Sold in one metre lengths, can be cut to suit

Floor/Edge Protection Plate
Hazard Warning Tube Sleeving

Hi-Vis PVC tubing -  Just springs over tube and grips. Durable and wipe clean finish


View full dimensions in the Hi-Gate brochure downloadable PDF above

For dimensions refered to in our quotation request form below see Hi-Gate Pallet Gate Cut Sheet PDF above.  Don't forget to add any optional features or extras  required.


Your form message has been successfully sent.

You have entered the following data:

Quotation request for Hi-Gate Universal Safety Gate

Please correct your input in the following fields:
Error while sending the form. Please try again later.

Note: Fields marked with * are required

Not sure if this model is the one you need?


See our Selecting Your Pallet Gate page.

Alternatively, please don't hesitate to call our sales team for advice on 0161 223 1990 or international +44 161 223 1990 - by email on mezzbarriers@dale-lifting.co.uk. or you can use our online non-specific safety gate enquiry forms to tell use about your application and we will provide a no-obligation competitive quotation tailored to your requirements.

Print Print | Sitemap Recommend this page Recommend this page
© Mezzbarriers.co.uk 2016