Self-Closing Safety Gate - Retro-Fit

Download layout sheet
Retro-fit-spring-close-tubular-handrail-[...]
Adobe Acrobat document [311.0 KB]

 

 

The Mezzbarriers Retro-Fit Self Closing Safety Gate enables compliance to EN 14122, Self-closing gates are the preferred solution over chains, bars or sliding tubes when protecting access areas as they automatically close behind the user -  overcoming the problem of human error.

Optimum gap size 1000 mm Gate is 550 mm high (Can be cut own to suit.  Can be right or left handed to suit application

These gates are manufactured utilising tube clamp components OD 33.7mm (B34) and are galvanised finish as standard  Width and height adjustment can easily be carried out on site with an allen key.and suitable steel cutting saw,  Vinyl slip-on Yellow/Black hazard warning sleeve can be purchased separately.

Self Closing
Spring Closure with a hinge fitted with stainless steel spring.

Gate Mounting
Gates are supplied with clamps to fit tube diameters 33.7 mm (B34), 42.4 mm (C42) or 48.3 mm (D48) retro-fit 'U' clamp brackets for attaching to an existing post. These safety gates provide safe access for many applications including rooftop barrier openings from a ladder or hatch. staircase handrails, walkways and personnel access guarding to danger zones 

Easy Installation

Retro-fit connection U-Bolts are used attach the fully assembled safety gate to a variety of uprights or to a flat surface with bolt-on hinges (Bolts not provided).

Post mounted: Fully assembled to a standard tube clamp end post with flange base. Sold separately for inclusion in a new handrail system.


Width Adjustment
The self-closing safety gate can easily be cut down to suit your existing gap; It has been designed to easily adjust to suit any gap that reaches up to 1m,  Just loosen the grub screw using a standard hex key provided and cut down the tubes to length to meet the gap requirement, reattach tubes, re-tightened and it's ready for use.

 

Special Requirements
Usually available ex-stock.  Please contact us for an accurate delivery schedule. 

The Self-Closing Gate is supplied as standard in hot dipped galvanised or colour coated tube in safety yellow at extra cost, on request.

Component Specification
Mezzbarriers tube clamps are made from malleable cast iron.  Manufactured in conformance with BS EN 1562:1997, a dependable and well-proven material for this type of product. The fittings are then hot-dipped galvanised to BS EN ISO 1461:1999 to produce a durable corrosion resistant finished surface for extended life. Grub screws and Springs are stainless steel

 

 

Request a quotation below.

 

Hi-Vis Hazard Warning Tube Sleeving

Ideal to improve the visibility of your safety gates and handrails.  Easy-fit PVC tubular sleeving - Just springs over tube and grips. Durable and wipe clean finish. (Used by scaffold companies). Fits tubes sizes B34, C42 and D48. Sold in one metre lengths and can be butted together for longer lengths and is easily cut to fit. 

 

Your form message has been successfully sent.

You have entered the following data:

Quotation Request for Self-Closing Safety Gate Retro-Fit Kit

Please correct your input in the following fields:
Error while sending the form. Please try again later.

Note: Fields marked with * are required

Print Print | Sitemap Recommend this page Recommend this page
© Mezzbarriers.co.uk 2016

Call

E-mail

Directions